On this page
All 41 charts
Click a chart to open its page
Bar9
Treemap1
Candle2
Pyramid1
Sankey1
Waterfall1
Parliament1
Pie family
Pie Basic: Animated Pie Chart for DaVinci Resolve
Pie Basic turns a short list of values into a clean pie chart. Use it for parts of a whole when the share matters more than the exact number.
Updated November 2026By Noyris Charts TeamTested on DaVinci Resolve 18-21
59
controls
4
Inspector pages
24
slices
100%
Resolve-native
Chart guide
The generator supports up to 24 slices, a legend, value labels and a sweep-style reveal. Slice angles are calculated from each value against the sum, so the input can be percentages or raw totals.
A pie works best with a small number of segments. When there are many categories or the differences are subtle, a bar chart or treemap usually communicates the comparison more accurately.
When to use Pie Basic
Budget or spending share
Show how a total splits across a handful of departments, categories or cost lines. Keep the slices ordered by size.
Audience or traffic mix
Use it for channel share, device split or source mix when the audience only needs the rough proportions.
Survey responses
A small set of mutually exclusive answers reads well as a pie, especially when one answer dominates the story.
Data format and sample file
The CSV is a label/value table. Values are weights: the generator divides each value by the sum to set the slice angle.
Sample CSV
pie-basic.csv
| Column | Type | What it holds |
|---|---|---|
| label | text | Segment name shown in the legend and labels. |
| value | number | Slice weight; values are normalized to the total. |
The sample values sum to 100, so they read as percentages. Any positive values work.
Synthetic sample data for layout testing - replace it with your own values before publishing.
Settings that make it look right
These are the controls worth setting first. Every value can be changed later on the chart's own Inspector pages below.
| Control | Start with | Why |
|---|---|---|
| Slices | 6 | Keeps the pie readable and the labels separated. |
| Pie Radius | 1 | Uses the frame cleanly without clipping the labels. |
| Donut Hole | 0 | Keeps this as a solid pie; raise it for a donut. |
| Slice Separator | 0.01 | Adds a subtle gap between neighboring slices. |
| Show Legend | On | Names the segments when the labels are short. |
| Duration | 1.0 s | A sweep reveal that stays quick. |
| Stagger (s) | 0.06 | Lets the slices arrive in sequence. |
Build it in DaVinci Resolve
1
Load the values
Open Data, load the CSV and set Slices to the number of rows. Check that the labels are short enough for the legend.
2
Set the geometry
Adjust Pie Radius and Slice Separator, then turn the legend on or off depending on how much room the frame gives you.
3
Animate the sweep
Use the Animation page to set the sweep timing and stagger. Stop on the final frame to confirm every label is visible.
Look and feel
This is one of 41 native chart generators.
Get the full Noyris Charts pack for $59, one time.
Frequently asked questions
Do the values need to add up to 100?+
No. The generator normalizes each value against the sum. Percentages and raw totals both work.
How many slices can I show?+
Pie Basic supports up to 24 slices. Five to seven slices is usually the readable range for video.
How is this different from Pie Donut?+
Pie Basic starts as a solid pie. Pie Donut has a larger default hole and a semicircle option for gauges.
Can I hide the legend?+
Yes. Turn Show Legend off when the category labels already explain the slices.
Related chart guides
Quick start
- 1Drag the generator from Effects → Generators → Noyris Charts onto your clip.
- 2Enter your values in the Data page (or load a CSV).
- 3Adjust Layout to size and space the chart.
- 4Pick a theme or manual colors in Style.
- 5Check Animate and hit play - the grow-in, stagger and easing are built in.
Inspector reference
All four Inspector pages shown exactly as they look in Resolve · the panel on the left explains every control
Data
Noyris Charts by noyris.com
Slices
Slices
Sets how many pie slices the chart draws. Values are read top-to-bottom from the data.
Data Source (CSV File)
Point to a CSV file below. Rows load as label,value (which CSV column is label vs value is set by the Label/Value Column controls). A line starting with # and a space is a comment (other #-labels are data); the Header Row First option skips the first row. First row is a header (column names) Pick which CSV column is the slice label and which is the value (0 = first column).
CSV File (optional)
Load a .csv to populate the chart in one click - rows are read as label,value (mapping set below).
Header Row First
Skip the first CSV row (treat it as column names).
Label Column (0=first)
Which column of the CSV file holds the element labels.
Value Column (0=first)
Which column of the CSV file holds the values.
Per-Slice Details× 24 slices
Visible
Shows or hides this data element (bar / slice / point / series) on the chart.
Value
The value for this element. The chart scales it against Chart Max to set the size it draws.
Label
The text shown on or next to this element (category name, slice label, axis name).
Slice Color
The color this slice is drawn in.
Layout
Noyris Charts by noyris.com
Geometry & Card
Chart Position
Moves the chart around inside the frame. The default is the centre.
Chart Size
How much of the frame the plot fills, from a small inset to edge to edge.
Pie Radius
How large the pie is inside the frame. Bigger makes a larger pie.
Donut Hole
The size of the hole in the middle - none for a solid pie, larger for a doughnut.
Slice Separator
Gap between neighboring slices (creates a segmented look).
Value Formatting
Prefix
Text prepended to every value label (e.g. '$').
Suffix
Text appended to every value label (e.g. 'pt').
Number Format
How numbers are written - plain, shortened (like 1.5k), or grouped with separators and decimals.
Options: Plain, Thousands, Compact (K/M/B)
Decimals
How many decimal places value labels show.
Labels & Title
Show Value Labels
Draws the numeric value label on each data element.
Value Label Size
Font size of the value labels.
Show Category Labels
Draws the category / element name next to each data element.
Category Label Size
Font size of the category labels.
Category Label Orientation
How the labels sit - flat, or turned upright. Upright helps when long names would overlap.
Options: Horizontal, Vertical
Category Label Mode
Where the category labels sit - beside the slice, on the slice, or in the legend.
Options: Simple Outside, Inside Radial, Legend
Value Label Gap
Distance between the data element and its value label.
Category Label Gap
Distance between the data element and its category label.
Show Legend
Draw the legend key identifying the series or groups.
Legend Gap
Spacing between legend entries.
Legend Size
Scale of the legend swatches/text.
Font
Font used for all chart text.
Style
Font style variant (Regular / Bold / Italic).
Letter Spacing
Tracking (letter-spacing) for chart labels.
Style
Noyris Charts by noyris.com
Apply Theme
Turns theming on or off. When on, every chart color comes from the selected theme; when off, the manual color controls are used.
Theme
Theme
Choose one of the built-in color themes. Each theme has a matching palette of colors.
Background
Show Background
Fills the whole frame with the theme/mood background color. Turn off for full transparency over your footage.
Background Color Mode
Which theme color fills the background (usually the sheet or tint color).
Options: Theme, Manual
Background Color
Which theme color fills the background (usually the sheet or tint color).
Value Label
Value Label Color Mode
Color of the value labels.
Options: Theme, Manual
Value Label Color
Color of the value labels.
Category Label
Category Label Color Mode
Color of the category labels.
Options: Theme, Manual
Category Label Color
Color of the category labels.
Animation
Noyris Charts by noyris.com
Animate
Turns the intro animation on or off. When off, the chart appears fully drawn right away.
Animation Style
How the chart appears - grow up from the baseline, or slide in from the side.
Options: Sweep, Grow, Fade, Bounce, Elastic, Pop, Spiral, Swirl
Stagger Order
The order the elements appear in - left to right, from the middle outwards, or shuffled.
Options: Forward, Reverse, Center Out, Random
Start
Frame/time (seconds) at which the animation begins.
Duration
Total animation length in seconds (the whole reveal).
Stagger (s)
Wait between each element's animation start. A bigger wait makes a more drawn-out wave.
Easing
The feel of the motion - soft in and out, or a snappy ease-out.
Options: Linear, Ease In, Ease In Out, Ease Out, Smooth, Back, Elastic, Bounce, Spring
Exaggeration
How far the animation pushes past its final position - none, or a strong bounce.
Settle
How long the overshoot takes to settle into final position (seconds).
Label Animation
How the labels appear - fade in, or pop in with the element.
Options: None, Fade, Pop, Slide, Spin
Clip Labels to Reveal
Labels mask in with their element instead of appearing all at once.
Min Angle for Label (rad)
Minimum slice angle (in radians) below which the slice label is hidden to avoid overlap.
Easing Curve
Use a ready-made easing curve, or shape your own curve with the handles below.
Options: None, Snappy, Soft, Liquid
Custom Progress Curve
Switch on the custom handles when you need a specific, non-standard curve.
Options: Disabled, Custom
Handle 1 X
Moves the first curve handle sideways to change the timing of the animation.
Handle 1 Y
Moves the first curve handle up or down to change how much progress happens at that point.
Handle 2 X
Moves the second curve handle sideways to change the timing of the animation.
Handle 2 Y
Moves the second curve handle up or down to change how much progress happens at that point.
All 41 charts
Bar
Treemap
Candle
Pyramid
Sankey
Waterfall
Parliament